How much floor space does drive-in rack actually save?

Trading aisles for lanes typically shrinks the footprint for the same pallet count by roughly a third, sometimes more in a taller building. We give you the side-by-side numbers in the layout rather than a rule of thumb.

What's the difference between drive-in and drive-through rack?

Drive-in is open at one end and runs LIFO - highest density. Drive-through is open at both ends and allows FIFO, at the cost of some positions and a second access aisle.

Does drive-in slow down put-away?

It can, since the truck has to travel into the lane for every pallet. It works best for bulk moves rather than piece picking - pairing it with a selective pick face keeps daily order fulfillment from bogging down.

How do you keep lift trucks from damaging the rack?

Floor-mounted guide rails steer the truck through the lane, and column guards plus rail-end protection absorb the contact that still happens. Both get specified with the system up front, not bolted on after the first repair.

How do you handle a seasonal peak when we need more positions for a few months?

We size the base system for normal operations and can price temporary or add-on positions separately for peak season, so you are not carrying idle steel the other nine months of the year.

We are outgrowing our current layout. Can you tear it down and reconfigure it?

Yes — reconfiguring an existing system is common. We measure what is there, note the manufacturer and connection style, and redesign the layout around your current pallet mix before scheduling a teardown and rebuild.

Drive-In Rack system inside a Florida warehouse

West Palm Beach, Florida

Drive-In Pallet Rack Systems in West Palm Beach, FL

Name: Miami Warehouse Racking
Address: 1738 SW 57th Ave., Miami, FL, 33155, US
Telephone: (305) 930-7780
Price range: $$

Import waves landing all at once and filling every open position for a week is the most common reason West Palm Beach warehouses call us. Drive-In Rack addresses that directly, reclaiming the positions a typical marine and boating layout in this market never uses.

We size the drive-in pallet rack around your pallets, your lift trucks, and the clear height in your Riviera Beach industrial building, factoring in lane dimensions drawn around your specific lift truck. You get a drawing and a line-item price for the Riviera Beach industrial site, not a rough estimate. Call (305) 930-7780 and we will start a West Palm Beach layout.

(305) 930-7780

Why West Palm Beach Warehouses Work With Us

Warehouses in and around Belvedere corridor tend to be constrained by something specific: a low sprinkler line, tight columns, or a dock that will not take a full truck at once. Those details decide a West Palm Beach design, not a standard drawing.

That is part of why drive-in rack fits West Palm Beach operations: bulk SKUs held deep while the pick face stays selective. A short design consult tells you quickly whether that tradeoff works for your SKUs, or whether another system carries more of the load in a Riviera Beach industrial footprint.

We also keep the West Palm Beach drive-in rack layout on file, so adding a bay next year or replacing a bent frame does not start from scratch.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Operations We Rack Around Here

Nearby areas we work in regularly include Riviera Beach industrial, Belvedere corridor, Okeechobee Boulevard flex, Northpoint.

Marine and boating

Construction supply

Beverage distribution

Regional logistics

Drive-in pallet rack lanes fitted with continuous rails

Drive-in warehouse racking loaded with bulk pallets

How Drive-In Rack Works

No aisles. The forklift enters the structure, and the floor holds more pallets per square foot than any other system.

Continuous rails, not beams

Pallets rest on rails carried by upright frames rather than individual beam levels, so a lane accepts pallet after pallet at the same elevation.

The truck enters the lane

The driver travels inside the bay to place or retrieve each load. Lane width, rail height, and mast clearance get dimensioned to that specific truck, not a generic one.

One open end or two

One open end gives LIFO and the highest density available. Two open ends give FIFO with slightly fewer positions, since each lane now needs clearance from both sides.

Guarding built into the design

Guide rails, column guards, and rail-end protection are part of the spec from the start, because a lane that takes daily contact from forklifts is a lane that will eventually need repair.

What a Drive-In Rack Project Includes

Every West Palm Beach drive-in rack project begins with the numbers: what you store, how heavy it is, what lifts it, and how tall the usable space is. That West Palm Beach conversation happens over the phone and usually takes about fifteen minutes.

From there our design team produces a CAD drive-in rack layout showing positions, elevations, and aisle widths for your West Palm Beach floor plan, plus an itemized quote so you see cost per pallet position. Where it helps, we price a second configuration on the same plan, with bulk SKUs held deep while the pick face stays selective, so the tradeoff between density and access is a number instead of an opinion. Load ratings for each drive-in rack level are documented in the West Palm Beach drawing, not guessed in the field.

Drive-In Rack freight is staged to fit Okeechobee Boulevard flex access, and installation partners build the system exactly as drawn, then verify plumb, anchor torque, and capacity tags. Phasing keeps your West Palm Beach floor operating during the install, and the same crew handles later additions or a relocation.

High volume of a small number of SKUs

Seasonal or buffer inventory held in bulk

Cold storage and freezer rooms where cube matters most

Product too fragile to floor-stack more than two high

Buildings where floor space, not height, is the binding constraint

Call (305) 930-7780

Recent Installations

Racking projects completed for warehouses across South Florida.

View More Projects

Get a Drive-In Rack Quote for Your West Palm Beach Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (305) 930-7780.

Miami Warehouse Racking

1738 SW 57th Ave.

Unit #A559

Miami, FL 33155

(305) 930-7780

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Miami Warehouse Racking regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.

Drive-In Rack Questions We Hear Most

Other Rack Types We Supply in West Palm Beach

Pallet Rack

Every pallet reachable, every time. The baseline we size everything else against.

View details

Pushback Rack

Two to six pallets deep from one aisle, without giving up much reach.

View details

Pallet Flow Rack

Load one side, pick the other, and let gravity enforce first in, first out.

View details

Cantilever Rack

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

View details

Carton Flow Rack

Cases advance to the picker instead of the picker hunting for cases.

View details

Nearby Areas We Also Serve

Our delivery and installation territory covers Miami-Dade, Broward, and Palm Beach counties, so one team can handle multiple buildings for the same company.

Drive-In Rack in Miami Drive-In Rack in Fort Lauderdale Drive-In Rack in Hialeah Drive-In Rack in Doral Drive-In Rack in Medley Drive-In Rack in Pompano Beach

View All Service Areas

Where We Work

Located in Miami, we serve the entire South Florida region with industrial pallet racks and warehouse storage solutions.

Miami Warehouse Racking

Address

1738 SW 57th Ave.
Unit #A559
Miami, FL 33155

Phone

(305) 930-7780

Business Hours

Monday - Friday: 8:00 AM - 6:00 PM
Saturday: Closed
Sunday: Closed

Need Drive-In Rack in West Palm Beach?

Call (305) 930-7780 or request a quote and we will get a layout started.

(305) 930-7780