How much floor space does drive-in rack actually save?

Trading aisles for lanes typically shrinks the footprint for the same pallet count by roughly a third, sometimes more in a taller building. We give you the side-by-side numbers in the layout rather than a rule of thumb.

What's the difference between drive-in and drive-through rack?

Drive-in is open at one end and runs LIFO - highest density. Drive-through is open at both ends and allows FIFO, at the cost of some positions and a second access aisle.

Does drive-in slow down put-away?

It can, since the truck has to travel into the lane for every pallet. It works best for bulk moves rather than piece picking - pairing it with a selective pick face keeps daily order fulfillment from bogging down.

How do you keep lift trucks from damaging the rack?

Floor-mounted guide rails steer the truck through the lane, and column guards plus rail-end protection absorb the contact that still happens. Both get specified with the system up front, not bolted on after the first repair.

We are outgrowing our current layout. Can you tear it down and reconfigure it?

Yes — reconfiguring an existing system is common. We measure what is there, note the manufacturer and connection style, and redesign the layout around your current pallet mix before scheduling a teardown and rebuild.

How quickly can you get drive-in rack into a Medley warehouse?

Standard components generally ship within a few days of an approved order, and complete projects — layout, steel, and installation — typically run one to four weeks depending on size. If you have a hard date, say so early and we will build the schedule backward from it.

Drive-In Rack system inside a Florida warehouse

Medley, Florida

Drive-In Rack in Medley, FL

Name: Miami Warehouse Racking
Address: 1738 SW 57th Ave., Miami, FL, 33155, US
Telephone: (305) 930-7780
Price range: $$

Import waves landing all at once and filling every open position for a week is the most common reason Medley warehouses call us. Drive-In Rack addresses that directly, reclaiming the positions a typical third-party logistics layout in this market never uses.

We size the drive-in warehouse racking around your pallets, your lift trucks, and the clear height in your NW 74th Street corridor building, factoring in the highest density available for a small number of SKUs. You get a drawing and a line-item price for the NW 74th Street corridor site, not a rough estimate. Call (305) 930-7780 and we will start a Medley layout.

(305) 930-7780

Why Medley Warehouses Work With Us

Medley operators mixing third-party logistics with building materials usually need one part of the floor dense and another part fully selective. That split is exactly where drive-in rack tends to earn its keep near South Medley.

As part of Warehouse Equipment & Supplies Co., we have designed storage for third-party logistics and beverage distribution operators around Medley industrial park since 1997 — enough history that aisles traded for lanes to push positions per square foot rarely surprises us mid-project.

Being close to Medley matters on the small things too: short delivery runs, a quick answer on a drive-in rack revision, and parts on hand when a lift truck clips a frame.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Operations We Rack Around Here

Nearby areas we work in regularly include NW 74th Street corridor, Medley industrial park, South Medley, Okeechobee industrial.

Third-party logistics

Building materials

Beverage distribution

Container freight stations

Drive-in pallet rack lanes fitted with continuous rails

Drive-in warehouse racking loaded with bulk pallets

How Drive-In Rack Works

No aisles. The forklift enters the structure, and the floor holds more pallets per square foot than any other system.

Continuous rails, not beams

Pallets rest on rails carried by upright frames rather than individual beam levels, so a lane accepts pallet after pallet at the same elevation.

The truck enters the lane

The driver travels inside the bay to place or retrieve each load. Lane width, rail height, and mast clearance get dimensioned to that specific truck, not a generic one.

One open end or two

One open end gives LIFO and the highest density available. Two open ends give FIFO with slightly fewer positions, since each lane now needs clearance from both sides.

Guarding built into the design

Guide rails, column guards, and rail-end protection are part of the spec from the start, because a lane that takes daily contact from forklifts is a lane that will eventually need repair.

What a Drive-In Rack Project Includes

Every Medley drive-in rack project begins with the numbers: what you store, how heavy it is, what lifts it, and how tall the usable space is. That Medley conversation happens over the phone and usually takes about fifteen minutes.

The deliverable is a drive-in rack drawing and a priced bill of material: positions, elevations, aisle widths, and capacities for your Medley industrial park building. Since the design turns on aisles traded for lanes to push positions per square foot, we normally include a denser alternative on the same plan so the third-party logistics tradeoff is explicit.

Drive-In Rack delivery windows are built around your Medley industrial park dock so trailers do not sit and wait. Installation partners work off the Medley drive-in rack drawing you approved, tag capacities on completion, and phase the job by zone or shift. Parts, added drive-in rack positions, and later reconfigurations go through the same Medley contact.

High volume of a small number of SKUs

Seasonal or buffer inventory held in bulk

Cold storage and freezer rooms where cube matters most

Product too fragile to floor-stack more than two high

Buildings where floor space, not height, is the binding constraint

Call (305) 930-7780

Recent Installations

Racking projects completed for warehouses across South Florida.

View More Projects

Get a Drive-In Rack Quote for Your Medley Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (305) 930-7780.

Miami Warehouse Racking

1738 SW 57th Ave.

Unit #A559

Miami, FL 33155

(305) 930-7780

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Miami Warehouse Racking regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.

Drive-In Rack Questions We Hear Most

Other Rack Types We Supply in Medley

Pallet Rack

Every pallet reachable, every time. The baseline we size everything else against.

View details

Pushback Rack

Two to six pallets deep from one aisle, without giving up much reach.

View details

Pallet Flow Rack

Load one side, pick the other, and let gravity enforce first in, first out.

View details

Cantilever Rack

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

View details

Carton Flow Rack

Cases advance to the picker instead of the picker hunting for cases.

View details

Nearby Areas We Also Serve

Our delivery and installation territory covers Miami-Dade, Broward, and Palm Beach counties, so one team can handle multiple buildings for the same company.

Drive-In Rack in Miami Drive-In Rack in Fort Lauderdale Drive-In Rack in Hialeah Drive-In Rack in Doral Drive-In Rack in Pompano Beach Drive-In Rack in Hollywood

View All Service Areas

Where We Work

Located in Miami, we serve the entire South Florida region with industrial pallet racks and warehouse storage solutions.

Miami Warehouse Racking

Address

1738 SW 57th Ave.
Unit #A559
Miami, FL 33155

Phone

(305) 930-7780

Business Hours

Monday - Friday: 8:00 AM - 6:00 PM
Saturday: Closed
Sunday: Closed

Need Drive-In Rack in Medley?

Call (305) 930-7780 or request a quote and we will get a layout started.

(305) 930-7780