How deep can a pushback lane go?

Two to six pallets deep is the practical range. Lanes beyond four deep only pay off if you consistently hold that many pallets per SKU - we size lane depth from your inventory profile, not by maxing out the rail.

How does push back racking compare to drive-in rack?

Both store deep from one face. With pushback the forklift stays in the aisle and gravity does the work, which is faster and gentler on the structure. Drive-in goes deeper and costs less per position, but the driver has to enter the lane to place and pull loads.

Will my drivers need retraining?

Barely any. Loading is closer to selective racking than to drive-in - square up in the aisle, set the pallet, let the cart take it. Most crews are comfortable within a shift.

What load capacities are available?

Cart and rail assemblies are commonly rated 2,500 to 4,000 lb per pallet, with heavier configurations available. We specify to your heaviest pallet with margin and hand over ratings for the finished lane.

Do you sell used pushback rack, or only new?

We focus on new components so load ratings and capacity tags are documented from day one. If used steel makes sense for a short-term need we will say so, but for anything carrying real weight day after day, new is usually the better call.

Our dock is tight and we cannot receive a full truckload at once. Does that change anything?

It changes the delivery plan, not the design. We stage material in smaller drops timed to your receiving hours, and sequence installation zone by zone so a tight dock does not hold up the schedule.

Pushback Rack system inside a Florida warehouse

Medley, Florida

Push Back Rack Systems Systems in Medley, FL

Name: Miami Warehouse Racking
Address: 1738 SW 57th Ave., Miami, FL, 33155, US
Telephone: (305) 930-7780
Price range: $$

Warehouses near NW 74th Street corridor keep hitting the same wall: the same SKU stored in five different places because the rack is only one deep. Pushback rack is one of the more direct ways for a Medley building to add capacity without touching the envelope.

Given the value of density added without pushing out a building wall, we model this against a second configuration on the same Medley floor plan so density and access are numbers you can compare. Free to see, no obligation to order, and the pushback rack numbers are yours either way. Call (305) 930-7780 about your NW 74th Street corridor building.

(305) 930-7780

Why Medley Warehouses Work With Us

What limits storage in a South Medley facility is usually structural — a column line in the wrong place, a beam pocket, an older slab. We work those Medley constraints out on paper before quoting steel.

Since 1997 we have supplied third-party logistics, building materials, and 3PL operations across Medley and the surrounding area through Warehouse Equipment & Supplies Co. The consult up front, where we talk through fewer aisles maintained for the same forklift fleet, is why the first layout is usually close to the final one.

Service does not stop at handoff on a Medley job either. If a pushback rack level needs to move in your Medley industrial park building or a beam gets damaged, the same team that designed the system answers the phone.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Operations We Rack Around Here

Nearby areas we work in regularly include NW 74th Street corridor, Medley industrial park, South Medley, Okeechobee industrial.

Third-party logistics

Building materials

Beverage distribution

Container freight stations

High-density pushback rack lanes loaded with pallets

Pushback pallet racking showing cart rails and load beams

How Pushback Rack Works

Two to six pallets deep from one aisle, without giving up much reach.

Loading from the aisle

The driver sets the first pallet on the front cart. Each pallet added after that pushes the cart train deeper into the lane, so one aisle handles the whole depth.

Carts nested on rails

Steel carts with nylon or steel wheels ride inclined rails, each nesting under the one ahead of it - that nesting is what makes multi-deep storage possible from a single face.

Retrieval by gravity

Pull the front pallet and the next cart rolls forward on the incline to the pick face. No driving into the lane, no repositioning pallets by hand.

Last in, first out

Each lane runs LIFO. That suits fast-turning product and any operation managing rotation by lane rather than by individual pallet date.

What a Pushback Rack Project Includes

A Medley pushback rack project starts with a phone call. We go through pallet footprint and weight, forklift type and lift height, clear height under the sprinklers in your NW 74th Street corridor building, column spacing, and how fast product turns.

Next comes the pushback rack layout itself — every position counted, every level rated, and the Medley quote itemized by frame, beam, deck, and accessory. Because fewer aisles maintained for the same forklift fleet changes the math, a second configuration on the same floor plan usually comes with it for comparison.

Stock pushback rack components move within days, and we time drops to your Medley shift schedule instead of one large delivery. Installation partners anchor and align to the drawing, tag every bay with its capacity, and work around your building materials production hours. The Medley layout stays on file for the next expansion.

Two to six pallets of the same SKU stacked in one lane

Cold storage or leased space where rent per square foot is steep

Operations trimming aisle count to add positions

Beverage, packaging, and consumer goods runs

Buildings with clear height to spare but limited floor

Call (305) 930-7780

Recent Installations

Racking projects completed for warehouses across South Florida.

View More Projects

Get a Pushback Rack Quote for Your Medley Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (305) 930-7780.

Miami Warehouse Racking

1738 SW 57th Ave.

Unit #A559

Miami, FL 33155

(305) 930-7780

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Miami Warehouse Racking regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.

Pushback Rack Questions We Hear Most

Other Rack Types We Supply in Medley

Pallet Rack

Every pallet reachable, every time. The baseline we size everything else against.

View details

Pallet Flow Rack

Load one side, pick the other, and let gravity enforce first in, first out.

View details

Drive-In Rack

No aisles. The forklift enters the structure, and the floor holds more pallets per square foot than any other system.

View details

Cantilever Rack

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

View details

Carton Flow Rack

Cases advance to the picker instead of the picker hunting for cases.

View details

Nearby Areas We Also Serve

Our delivery and installation territory covers Miami-Dade, Broward, and Palm Beach counties, so one team can handle multiple buildings for the same company.

Pushback Rack in Miami Pushback Rack in Fort Lauderdale Pushback Rack in Hialeah Pushback Rack in Doral Pushback Rack in Pompano Beach Pushback Rack in Hollywood

View All Service Areas

Where We Work

Located in Miami, we serve the entire South Florida region with industrial pallet racks and warehouse storage solutions.

Miami Warehouse Racking

Address

1738 SW 57th Ave.
Unit #A559
Miami, FL 33155

Phone

(305) 930-7780

Business Hours

Monday - Friday: 8:00 AM - 6:00 PM
Saturday: Closed
Sunday: Closed

Need Pushback Rack in Medley?

Call (305) 930-7780 or request a quote and we will get a layout started.

(305) 930-7780