How deep can a pushback lane go?

Two to six pallets deep is the practical range. Lanes beyond four deep only pay off if you consistently hold that many pallets per SKU - we size lane depth from your inventory profile, not by maxing out the rail.

How does push back racking compare to drive-in rack?

Both store deep from one face. With pushback the forklift stays in the aisle and gravity does the work, which is faster and gentler on the structure. Drive-in goes deeper and costs less per position, but the driver has to enter the lane to place and pull loads.

Will my drivers need retraining?

Barely any. Loading is closer to selective racking than to drive-in - square up in the aisle, set the pallet, let the cart take it. Most crews are comfortable within a shift.

What load capacities are available?

Cart and rail assemblies are commonly rated 2,500 to 4,000 lb per pallet, with heavier configurations available. We specify to your heaviest pallet with margin and hand over ratings for the finished lane.

What does a pushback rack project in Hollywood typically cost per pallet position?

It depends on beam capacity, height, and how deep you store, which is why the quote is itemized and the layout shows a position count. Comparing cost per position across two configurations on your own floor plan is the only honest way to answer it.

Can we add more lanes or positions later without redoing the whole system?

That is the point of designing it as a layout rather than a one-off order. We keep the drawing on file, so adding a bay, a lane, or a run next year starts from where the system already is instead of from scratch.

Pushback Rack system inside a Florida warehouse

Hollywood, Florida

Pushback Rack Layouts for Hollywood, FL

Name: Miami Warehouse Racking
Address: 1738 SW 57th Ave., Miami, FL, 33155, US
Telephone: (305) 930-7780
Price range: $$

A lot of the calls we get from Hollywood start with the same SKU stored in five different places because the rack is only one deep. Pushback pallet racking usually fixes it, because it changes how much of a Port 95 area floor plate is actually available to store product without moving a wall.

Given the value of cart and rail assemblies matched to your pallet weight, we model this against a second configuration on the same Hollywood floor plan so density and access are numbers you can compare. Free to see, no obligation to order, and the pushback rack numbers are yours either way. Call (305) 930-7780 about your Pembroke Road corridor building.

(305) 930-7780

Why Hollywood Warehouses Work With Us

No two buildings near Pembroke Road corridor carry the same combination of clear height, aisle width, and floor loading, which is why we draw every Hollywood layout to the site instead of pulling one off a shelf.

Since 1997 we have supplied consumer goods distribution, medical supply, and 3PL operations across Hollywood and the surrounding area through Warehouse Equipment & Supplies Co. The consult up front, where we talk through density added without pushing out a building wall, is why the first layout is usually close to the final one.

One number reaches the people who did the work, whether that is a pushback rack revision during design or a replacement upright for a North Hollywood industrial site three years out.

Free warehouse consultation

CAD layout with position counts

Installation by trusted installation partners

Operations We Rack Around Here

Nearby areas we work in regularly include Pembroke Road corridor, Port 95 area, North Hollywood industrial, Dania cutoff.

Consumer goods distribution

Medical supply

Last-mile delivery

Light assembly

High-density pushback rack lanes loaded with pallets

Pushback pallet racking showing cart rails and load beams

How Pushback Rack Works

Two to six pallets deep from one aisle, without giving up much reach.

Loading from the aisle

The driver sets the first pallet on the front cart. Each pallet added after that pushes the cart train deeper into the lane, so one aisle handles the whole depth.

Carts nested on rails

Steel carts with nylon or steel wheels ride inclined rails, each nesting under the one ahead of it - that nesting is what makes multi-deep storage possible from a single face.

Retrieval by gravity

Pull the front pallet and the next cart rolls forward on the incline to the pick face. No driving into the lane, no repositioning pallets by hand.

Last in, first out

Each lane runs LIFO. That suits fast-turning product and any operation managing rotation by lane rather than by individual pallet date.

What a Pushback Rack Project Includes

We start by understanding the consumer goods distribution side of your operation — pallet profile, equipment, clear height, SKU count, throughput — because those inputs decide pushback rack capacity in a Pembroke Road corridor building long before steel is quoted.

You then get a pushback rack position count for the Hollywood footprint, load ratings for every beam level, and pricing broken out by component, so cost per pallet position is visible rather than buried in a lump sum. Where it makes sense we run the same plan a second way, with density added without pushing out a building wall.

Stock pushback rack components move within days, and we time drops to your Hollywood shift schedule instead of one large delivery. Installation partners anchor and align to the drawing, tag every bay with its capacity, and work around your medical supply production hours. The Hollywood layout stays on file for the next expansion.

Two to six pallets of the same SKU stacked in one lane

Cold storage or leased space where rent per square foot is steep

Operations trimming aisle count to add positions

Beverage, packaging, and consumer goods runs

Buildings with clear height to spare but limited floor

Call (305) 930-7780

Recent Installations

Racking projects completed for warehouses across South Florida.

View More Projects

Get a Pushback Rack Quote for Your Hollywood Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (305) 930-7780.

Miami Warehouse Racking

1738 SW 57th Ave.

Unit #A559

Miami, FL 33155

(305) 930-7780

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Miami Warehouse Racking regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.

Pushback Rack Questions We Hear Most

Other Rack Types We Supply in Hollywood

Pallet Rack

Every pallet reachable, every time. The baseline we size everything else against.

View details

Pallet Flow Rack

Load one side, pick the other, and let gravity enforce first in, first out.

View details

Drive-In Rack

No aisles. The forklift enters the structure, and the floor holds more pallets per square foot than any other system.

View details

Cantilever Rack

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

View details

Carton Flow Rack

Cases advance to the picker instead of the picker hunting for cases.

View details

Nearby Areas We Also Serve

Our delivery and installation territory covers Miami-Dade, Broward, and Palm Beach counties, so one team can handle multiple buildings for the same company.

Pushback Rack in Miami Pushback Rack in Fort Lauderdale Pushback Rack in Hialeah Pushback Rack in Doral Pushback Rack in Medley Pushback Rack in Pompano Beach

View All Service Areas

Where We Work

Located in Miami, we serve the entire South Florida region with industrial pallet racks and warehouse storage solutions.

Miami Warehouse Racking

Address

1738 SW 57th Ave.
Unit #A559
Miami, FL 33155

Phone

(305) 930-7780

Business Hours

Monday - Friday: 8:00 AM - 6:00 PM
Saturday: Closed
Sunday: Closed

Need Pushback Rack in Hollywood?

Call (305) 930-7780 or request a quote and we will get a layout started.

(305) 930-7780